gkarris
Jun 19, 02:32 PM
Does it have the paperwork?
Would you be willing to outright sell the Touch for enough to cover the $199 subsidized iPhone? (assuming you are eligible *ducks*)
Would you be willing to outright sell the Touch for enough to cover the $199 subsidized iPhone? (assuming you are eligible *ducks*)
hsaybasili
Dec 29, 01:02 PM
There must be a config file by which refresh rate is adustable. I am going to try to find it out. (yes I just have an ibook :( , but I am a very curious person:) )
In linux it is /etc/X11/xorg.conf (was /etc/X11/XF86Config) in which you can set all the display properties including refresh rates. As OS X is based on UNIX, there must be a config file to edit manually. Or let say I hope :)
Trying with a Linux live cd (for power pc architecture of course) may give some ideas. There are a lot of distributions: Ubuntu and Yellow Dog for example... If it works in linux without lines, then this is a software problem. If the lines exists, you can (I am not very sure but worth to try) also change the xorg.conf even if this is a live cd version. You can edit these files and restart Xserver afterwards.
If it is a software problem (which I also suspect), it should be possible to make it disappear by installing linux and tweeking the video settings. It may also be a firmware issue, and it won't be fixed until Apple address the problem.
So, has anyone tried the new PB with Linux??
Personally I don't see it as a problem. I have to get as close as 15cm from the screen to actually see the effect. I know that would give me a headache, lines or not :)
In linux it is /etc/X11/xorg.conf (was /etc/X11/XF86Config) in which you can set all the display properties including refresh rates. As OS X is based on UNIX, there must be a config file to edit manually. Or let say I hope :)
Trying with a Linux live cd (for power pc architecture of course) may give some ideas. There are a lot of distributions: Ubuntu and Yellow Dog for example... If it works in linux without lines, then this is a software problem. If the lines exists, you can (I am not very sure but worth to try) also change the xorg.conf even if this is a live cd version. You can edit these files and restart Xserver afterwards.
If it is a software problem (which I also suspect), it should be possible to make it disappear by installing linux and tweeking the video settings. It may also be a firmware issue, and it won't be fixed until Apple address the problem.
So, has anyone tried the new PB with Linux??
Personally I don't see it as a problem. I have to get as close as 15cm from the screen to actually see the effect. I know that would give me a headache, lines or not :)
el greenerino
Dec 20, 05:59 AM
You could probably take what you need scanned to a service bereau, they'd probably do a better job than anything the average home user would. Just make sure they're reputable and use equipment that's better han what they use at walgreens :p
aquajet
Sep 19, 12:53 PM
Does around �400-�450 for a ~700mhz G3 with Airport sound about right? I'm not looking at a particular auction, but as a general guide.
That's too much for a G3. You might as well get an iBook G4 or even a refurb model from the Apple Store if you're prepared to pay that much. The US refurb store currently has 12" iBook G4 1.2 Ghz with CD-ROM for $699.
That's too much for a G3. You might as well get an iBook G4 or even a refurb model from the Apple Store if you're prepared to pay that much. The US refurb store currently has 12" iBook G4 1.2 Ghz with CD-ROM for $699.
more...
GrannySmith_G5
Sep 9, 06:52 AM
A resurrection of GG Allin.
CanadaRAM
Sep 27, 08:37 PM
I would just take oral sex over the RAM, but that's just me I guess. :D
RAM lasts longer.
(No, that's not just me boasting... ;) )
RAM lasts longer.
(No, that's not just me boasting... ;) )
more...
Dreadnought
Jan 23, 01:59 PM
you can also run two instances of folding on a machine with hypertreading, that could possibly be more easy.
dornoforpyros
Aug 18, 10:13 AM
thanks. i was asking about the page layout, not the video itself.
uh ok, it's a grey page with a blue box and an cold play video :rolleyes:
Sorry man I'm not very impressed, it's clean and simple yes, but the darkish coloured text on the blue box doesn't really have alot of contrast, sure you can read it but it certanly doesn't jump out at you. Plus I've never been a big fan of super minimalist design, add some gradiants!
The text colour needs to be adjusted a bit but here's the direction I'd take it.
uh ok, it's a grey page with a blue box and an cold play video :rolleyes:
Sorry man I'm not very impressed, it's clean and simple yes, but the darkish coloured text on the blue box doesn't really have alot of contrast, sure you can read it but it certanly doesn't jump out at you. Plus I've never been a big fan of super minimalist design, add some gradiants!
The text colour needs to be adjusted a bit but here's the direction I'd take it.
more...
GFLPraxis
Mar 26, 09:45 PM
Aw man :(
I would love, love, LOVE to help. But I'm so time-strapped right now I'm not even keeping up with Nintendo Players adequately. Part-time IT job + student = suckage.
I would love, love, LOVE to help. But I'm so time-strapped right now I'm not even keeping up with Nintendo Players adequately. Part-time IT job + student = suckage.
random47
Oct 1, 01:50 PM
I have got a new pasion for acustic guitar music.
Is there anyone you can recorment?
thanks:)
Is there anyone you can recorment?
thanks:)
more...
Dalton63841
Feb 7, 10:13 PM
Just wonderful...Still not as good as this (http://gizmodo.com/#!5734552/hunter-becomes-hunted-a-fox-shoots-a-man) though...
aarond12
Jan 25, 05:46 PM
Since no examples were given, I have to say: USE COMIC SANS FOR EVERYTHING. :eek:
Seriously, each document/logo/presentation needs deep consideration of the audience, corporate branding, etc., to choose a font. This usually isn't a "throw a dart and choose a font" type of thing...
Seriously, each document/logo/presentation needs deep consideration of the audience, corporate branding, etc., to choose a font. This usually isn't a "throw a dart and choose a font" type of thing...
more...
mmmdreg
Jul 23, 03:48 AM
what is the server right now?
and are the macapps forums hosted on the same server?
and are the macapps forums hosted on the same server?
sk4prez2020
Dec 28, 06:43 PM
Glad to see they are making improvements finally. I don't think that Mobile Me is worth the fee now that the "Find My iPhone" feature is free. :apple:
more...
iCaleb
Sep 14, 06:51 PM
Ok I was down by are pond and I caught this strange thing and put it in a bucket.
And that lump kinda freaked me out.......What the heck is it??
Thanks:)
http://i979.photobucket.com/albums/ae273/CalebDa/100_7089.jpg
And that lump kinda freaked me out.......What the heck is it??
Thanks:)
http://i979.photobucket.com/albums/ae273/CalebDa/100_7089.jpg
Kees Braam
Jan 9, 12:15 PM
The first thing you need to confirm is that the logo is indeed in vector form when you open it in Illustrator and not just a bounding box indicating pixel-based art.
Toggle the keyboard shortcut Command + Y or go to the pulldown menu View > Outline (or alternatively Preview) to view your art in both modes.
If you have actual vector art, then check the following...
• Pulldown menu Window > Layers - are there any locked layers?
• Pulldown menu Object - is Unlock All in black? That would indicate an object has been locked.
Those would be two things to check.
I've checked these things that you've mentioned, but the problem is that I just can't find an option to cut a piece out of the logo. Here is an example (imagine it as a nicely designed logo):
''MacRumors: Forums
mac community discussion forums''
Just imagine the text to be in a nice logo with different colors and stuff. What I want to do is to cut only the part ''MacRumors: Forums'' out of it so that I can use it separately. I know that Photoshop can do it, but the problem with Photoshop is that it converts .EPS (vector) files to a pixel image and I need to scale it up in Illustrator afterwards so this isn't an option for me. Illustrator just doesn't seem to have a simple scissor/cut tool to cut out parts of a placed image, or am I totally missing something?
Anyway: thanks for your reply.
Toggle the keyboard shortcut Command + Y or go to the pulldown menu View > Outline (or alternatively Preview) to view your art in both modes.
If you have actual vector art, then check the following...
• Pulldown menu Window > Layers - are there any locked layers?
• Pulldown menu Object - is Unlock All in black? That would indicate an object has been locked.
Those would be two things to check.
I've checked these things that you've mentioned, but the problem is that I just can't find an option to cut a piece out of the logo. Here is an example (imagine it as a nicely designed logo):
''MacRumors: Forums
mac community discussion forums''
Just imagine the text to be in a nice logo with different colors and stuff. What I want to do is to cut only the part ''MacRumors: Forums'' out of it so that I can use it separately. I know that Photoshop can do it, but the problem with Photoshop is that it converts .EPS (vector) files to a pixel image and I need to scale it up in Illustrator afterwards so this isn't an option for me. Illustrator just doesn't seem to have a simple scissor/cut tool to cut out parts of a placed image, or am I totally missing something?
Anyway: thanks for your reply.
more...
MrMac'n'Cheese
Apr 19, 10:10 PM
Is retina pad dead for good?
Yes, may the funeral pyres ring their bells, it was good while it lasted *amen*
Yes, may the funeral pyres ring their bells, it was good while it lasted *amen*
livingfortoday
Mar 20, 09:23 PM
Here's a similar project (http://www.clayj.com/html/BRVAIOBoy.htm) (although the description is not quite as detailed) on a Sony notebook, in case anyone wants to compare results.
The beauty of painting the iBook, in my opinion, though, is that since you can take off the shell and make it clear, you can paint the inside of it, therefore making it impossible to scratch off or damage any painting you do. I mean, the Vaio looks awesome and all, but you'd have to be darn careful with it. The down side is that you have to paint it like a mirror image, though, and you also have to paint the picture with the top layers first, which makes it kind of complicated.
But I mean, an iBook is an iBook... a Vaio... well, that's just a PC. :p
The beauty of painting the iBook, in my opinion, though, is that since you can take off the shell and make it clear, you can paint the inside of it, therefore making it impossible to scratch off or damage any painting you do. I mean, the Vaio looks awesome and all, but you'd have to be darn careful with it. The down side is that you have to paint it like a mirror image, though, and you also have to paint the picture with the top layers first, which makes it kind of complicated.
But I mean, an iBook is an iBook... a Vaio... well, that's just a PC. :p
Sun Baked
Sep 17, 04:20 PM
So is that definitely what i have? it says on some of the memory sites that somes G5s have four dimm slots and others 8. I'm pretty sure mine has 8, but want to verify.As I said before...
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
PowerMac G5 = DIMMs in PAIRS
4 DIMM or 8 DIMMs do not matter, all PowerMac G5s use memory in pairs -- due to dual channel memory.
Single channel is 1 DIMM installed at a time, the PowerMac G5 is NOT one of these machines. Therefore install 2 at a time.
wickedG35
Mar 13, 02:47 PM
The only things I would consider doing a partial trade for is:
1. Firelite Firewire 160GB external HD
2. 500GB MyBook Studio External HD
1. Firelite Firewire 160GB external HD
2. 500GB MyBook Studio External HD
lkirkup
Mar 24, 10:33 AM
Hi All...
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
zelmo
Feb 2, 06:02 PM
Every month at work, we purchase a new PC to upgrade general office computers. Right now, the typical boxes we are getting are 3.2GHz P4 boxes with 1GB of memory. The IT guy and I are debating the wisdom/stupidity of installing Folding on them, and switching back and forth every month between user names. We got the okay from the boss to Fold on a few specific boxes, so we probably won't do this...but it's fun to plot and plan anyway.:p
iGav
Jul 23, 06:59 AM
Oh I'm sorry, wrong meeting.
Wrong meeting? errr… how many do you actually go to??? :eek: ;)
As for Time Team - did they find an actual full henge? (Well all the post holes)? I can't remember either... (I thought it was the local work camp and an explanation of the ritual landscape?)
I thought they found evidence of the post holes in a circle, and outside of that circle they found human remains, I do remember the ceremonial walkway between the sites, and the theory that they'd built a dock on the nearby river etc.
But like I said it's all rather fuzzy though. *strokes chin*
Wrong meeting? errr… how many do you actually go to??? :eek: ;)
As for Time Team - did they find an actual full henge? (Well all the post holes)? I can't remember either... (I thought it was the local work camp and an explanation of the ritual landscape?)
I thought they found evidence of the post holes in a circle, and outside of that circle they found human remains, I do remember the ceremonial walkway between the sites, and the theory that they'd built a dock on the nearby river etc.
But like I said it's all rather fuzzy though. *strokes chin*
Macky-Mac
Apr 21, 10:38 PM
So, do we know who or what organization put this idea forward?
it's the "North Dakota Family Alliance" whose executive director is Tom D. Freier who is;
Tom D. Freier is a North Dakota politician and public servant with the North Dakota Republican Party.... link (http://en.wikipedia.org/wiki/Tom_Freier)
it's the "North Dakota Family Alliance" whose executive director is Tom D. Freier who is;
Tom D. Freier is a North Dakota politician and public servant with the North Dakota Republican Party.... link (http://en.wikipedia.org/wiki/Tom_Freier)
No comments:
Post a Comment