HexMonkey
Jan 4, 03:10 AM
I've discussed the reasons for adding the cleanup template with 840quadra via PM, so hopefully it's all cleared up. I had originally stated reasons when I made the edit, but I had been in a hurry so must have mistakenly removed them. I apologize for this.
I've made some major changes to the page (and removed the cleanup template), including removing most of the images. I think they added a lot of clutter to the page while providing minimal gain, and also resulted in excessive load times (especially for users on dialup). However, I'm open to discussion about this if people disagree with the change, and if the general consensus is to put the removed images back, I'd be happy for that to happen.
But I don't understand this whole "ugly guide" thing...isn't just sending the PM and not moving the guide at all enough?
The point of the cleanup template isn't to tell the original author that they need to clean it up, but rather that the community in general needs to clean it up, since each article is not "owned" by the original author (so a PM wouldn't be appropriate). Personally I don't agree with them being called "ugly guides", it's usually more an issue of them not being consistent with formatting of other pages (and sometimes also having bad spelling and/or grammar) than them being ugly. For reference, all I originally did was add the cleanup template to the top of the page, and as a side effect it's added to the Ugly Guides category. I didn't "move" the article there.
I've made some major changes to the page (and removed the cleanup template), including removing most of the images. I think they added a lot of clutter to the page while providing minimal gain, and also resulted in excessive load times (especially for users on dialup). However, I'm open to discussion about this if people disagree with the change, and if the general consensus is to put the removed images back, I'd be happy for that to happen.
But I don't understand this whole "ugly guide" thing...isn't just sending the PM and not moving the guide at all enough?
The point of the cleanup template isn't to tell the original author that they need to clean it up, but rather that the community in general needs to clean it up, since each article is not "owned" by the original author (so a PM wouldn't be appropriate). Personally I don't agree with them being called "ugly guides", it's usually more an issue of them not being consistent with formatting of other pages (and sometimes also having bad spelling and/or grammar) than them being ugly. For reference, all I originally did was add the cleanup template to the top of the page, and as a side effect it's added to the Ugly Guides category. I didn't "move" the article there.
Lau
Nov 2, 06:44 AM
Have been meaning to convert the video for ages and I finally did it last night - Sorenson Video 3 codec works fine. Thanks to everyone for their help.
mnkeybsness
Nov 8, 04:37 PM
STAY AWAY FROM PHPBB!
Sorry to yell, but I built macthemesforums.net (http://macthemesforums.net) with phpbb and we all have been regretting it since about 3 months after the site launched. Security holes were the first major issue that we encountered... and now we have incredibly slow loading times and it is very hard to upgrade the software since we have made so many hacks to the default installation.
If you want lightweight and super fast, try PunBB (http://punbb.org).
If you want a powerful board with good support, use vBulleting or Invision Powerboard.
Sorry to yell, but I built macthemesforums.net (http://macthemesforums.net) with phpbb and we all have been regretting it since about 3 months after the site launched. Security holes were the first major issue that we encountered... and now we have incredibly slow loading times and it is very hard to upgrade the software since we have made so many hacks to the default installation.
If you want lightweight and super fast, try PunBB (http://punbb.org).
If you want a powerful board with good support, use vBulleting or Invision Powerboard.
b-rad g
Mar 5, 04:31 PM
Been in the process of ripping and encoding my DVD collection to the Mini for about a month now. Have been using Handbrake only to do the entire process so far, and usually can only get about 3 a day after work.
Today decided to try Rip It to pre-rip a bunch and the queue them up in Handbrake so I can leave it running. The Rip It part has gone really well as I ripped 15 DVD's in a row in a matter of hours.
But now have started the encoding part, and Handbrake is crawling!:(
When I was using Handbrake for the entire process I was averaging around 30 fps. But now I have all rips queued up and the first is doing around 10 fps! What's the deal? I figured it would be faster encoding from HD instead of DVD.
Also tried to encode Hunt for Red October and it says "Suspected RCE Region 1". Is there any way to remove the region from ripped file?
Hopefully someone has been through this before and can help me out.
Today decided to try Rip It to pre-rip a bunch and the queue them up in Handbrake so I can leave it running. The Rip It part has gone really well as I ripped 15 DVD's in a row in a matter of hours.
But now have started the encoding part, and Handbrake is crawling!:(
When I was using Handbrake for the entire process I was averaging around 30 fps. But now I have all rips queued up and the first is doing around 10 fps! What's the deal? I figured it would be faster encoding from HD instead of DVD.
Also tried to encode Hunt for Red October and it says "Suspected RCE Region 1". Is there any way to remove the region from ripped file?
Hopefully someone has been through this before and can help me out.
more...
PowerGamerX
Apr 27, 06:05 PM
Don't get me wrong, I really love my Mac, and the aesthetics of it. The hardware is enough for my needs, and overall I would be happy...
Problem is I have had nothing but trouble with SL. Every application I have seems to have crashed at least one point in time. I never really had a problem with Leopard and, Leopard is what convinced me to switch to the Mac OS in the first place. However, now, I'm contemplating switching back to Windows (rather, using BootCamp full time).
It doesn't seem to matter if I use a different hard drive, swap out ram, etc. None of the problems I have are hardware based. It's all software.
I'm really just curious to see how many people feel the same way about Snow Leopard. In fact, the experiences I've had remind me of Windows XP. Nothing really wrong with any of my hardware. It's just none of my software seems stable.
I'm really hoping Lion turns out good though.
Problem is I have had nothing but trouble with SL. Every application I have seems to have crashed at least one point in time. I never really had a problem with Leopard and, Leopard is what convinced me to switch to the Mac OS in the first place. However, now, I'm contemplating switching back to Windows (rather, using BootCamp full time).
It doesn't seem to matter if I use a different hard drive, swap out ram, etc. None of the problems I have are hardware based. It's all software.
I'm really just curious to see how many people feel the same way about Snow Leopard. In fact, the experiences I've had remind me of Windows XP. Nothing really wrong with any of my hardware. It's just none of my software seems stable.
I'm really hoping Lion turns out good though.
vniow
Nov 3, 08:17 AM
Originally posted by idkew
i don't feel near as close to the "crew" as it seems that eye an v and jello... are.
Woah, there's a crew here?
*looks around nervously*
i don't feel near as close to the "crew" as it seems that eye an v and jello... are.
Woah, there's a crew here?
*looks around nervously*
more...
cymrulp
Sep 20, 11:21 AM
Hi
Just wanted to see who else uses Logic Pro or all of the Logic Studio software?
Got a nice surprise from my wife for anniversary present, been wanting it for ages.
Putting all my thoughts down on
http://www.guitaristhub.com
Just wanted to see who else uses Logic Pro or all of the Logic Studio software?
Got a nice surprise from my wife for anniversary present, been wanting it for ages.
Putting all my thoughts down on
http://www.guitaristhub.com
PRPS
Jan 21, 09:36 PM
i have an M-Audio Axiom 49 (2nd gen) which i am extremely happy with. it syncs (knobs, faders, along with other controls) great with Logic 9.
more...
Peter.Howard
Nov 13, 09:07 PM
Hold down SHIFT, turn it on,
wait till the "Welcome to Macintosh" screen disapears
then it should loadup without the extensions
wait till the "Welcome to Macintosh" screen disapears
then it should loadup without the extensions
MacBoobsPro
Oct 20, 04:16 AM
Nice job. I would probably smooth out the background surface for true Apple authenticity. ;)
more...
Diatribe
Nov 25, 04:46 PM
Has anything happened for this yet?
After reading threads like this (http://forums.macrumors.com/showthread.php?t=163611), I think we should maybe start a guide about equivalent apps, Windows to Mac.
I don't know nearly enough about Wiki to start and don't have quite enough time to learn today. :o
Judging by your post count you have more than enough time on your hands... :D :p and besides it's not exactly rocket science.
After reading threads like this (http://forums.macrumors.com/showthread.php?t=163611), I think we should maybe start a guide about equivalent apps, Windows to Mac.
I don't know nearly enough about Wiki to start and don't have quite enough time to learn today. :o
Judging by your post count you have more than enough time on your hands... :D :p and besides it's not exactly rocket science.
macdaddyuk
Feb 15, 10:18 AM
Hi Guys, Im new to the forum but thought its the best place to ask. I have a interview for the role of a Apple Creative this week and just wanted to find out what happens at these event and how to they select the right candidates if we all in one big group?
any heads up would be good.
Thanks in advance!
any heads up would be good.
Thanks in advance!
more...
numlock
Feb 22, 12:37 PM
Firt find the specs for your USB turntable. If it is only doin 44K and 16-bits there is no point saving as 24-bits and 96K. Save the data at the naticve bit depth and sample rate.
As for format, any lossless format will do as will uncompressed WAV. Save your archive that way but you may wantothe compress to ssmall files for use with iTunes and your iPod.
PS.
I always wonder how they sell these USB turn tables. I would have thought that anyone who has vinyl records would already own a turn table and would simply use that connected to the audio input on the Mac.
Thanks. How exactly do I find the specs for the turntable? Is there something on the computer that can tell me it?
I did call ion up and they recommend 44k and 16bit so I guess thats the specs.
Well I do own an old pioneer turntable but I saw this one day on woot and just decided to get it. Ive questioned my purchase a few times since then but I at least want to try it out.
As for format, any lossless format will do as will uncompressed WAV. Save your archive that way but you may wantothe compress to ssmall files for use with iTunes and your iPod.
PS.
I always wonder how they sell these USB turn tables. I would have thought that anyone who has vinyl records would already own a turn table and would simply use that connected to the audio input on the Mac.
Thanks. How exactly do I find the specs for the turntable? Is there something on the computer that can tell me it?
I did call ion up and they recommend 44k and 16bit so I guess thats the specs.
Well I do own an old pioneer turntable but I saw this one day on woot and just decided to get it. Ive questioned my purchase a few times since then but I at least want to try it out.
furryrabidbunny
Sep 8, 09:54 PM
I didn't pay for the computer!!! it was given to me. I am giving the parents the eMac because xp is just a tad harder than os x ;) I also need a pc for a required computer class. I need to be able to take tests and stuff at home. I yes, I am going to switch back when the mac mini features a one of those intel mobile chips with low wattage.
more...
arockmoneymaker
Jun 21, 12:56 PM
I am seriously considering camping out as I REALLY want one as soon as possible... Has anyone been at this location for a launch before? Is it pretty popular? I was hoping that maybe it wasn't as popular of an Apple store and that the lines would be shorter... that and I live in Oakland about 5 minutes away!
BlindSoul
May 1, 04:02 AM
Thanks for all the answers and discussion. I'm a bit disappointed about losing the unlock upon a reboot. On another note, will OS 4.3.2 be un-lockable using the Gevey?
more...
Molly Sims in Sports
Molly Sims Gallery
molly sims diamond bikini
more...
munkle
Jan 1, 01:09 PM
As Mac developers go, I like the Omni Group and think they're a shining example.
The Delicious Company, from the people who used to work at Omni, also looks like a promising fun bunch.
The Delicious Company, from the people who used to work at Omni, also looks like a promising fun bunch.
aptmunich
Dec 20, 08:33 AM
I got the LaCie Porsche design 16x dual layer burner (couldn't get the regular LaCie over here and it was cheaper...) and it works really well!
ucfgrad93
Mar 8, 11:32 PM
i Spy
prostuff1
Sep 22, 07:04 PM
No, i can still get the printer from canons website no problem. So it is apple who has discontinued...they just stopped carrying it.
I can get it just fine through canon, amazon, newegg, and some other sites but then i would not get the rebate!!
I can get it just fine through canon, amazon, newegg, and some other sites but then i would not get the rebate!!
jbromer
Apr 9, 09:41 PM
http://cgi.ebay.com/NEW-bLack-ReD-Camero-BuMper-cAsE-Cover-OEM-iPhone-4-/220749505305?pt=PDA_Accessories&hash=item3365b22319
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
Looks just like the SGP Neo Hybrid EX (a knockoff?). If so, only the Apple plug will fit...
If so what do you think? is the charging port bigger than the oem apple bumper? (can you plug in non apple plugs)
Thanks!
Looks just like the SGP Neo Hybrid EX (a knockoff?). If so, only the Apple plug will fit...
3777
Sep 9, 01:49 AM
........is that some of the hardware, even 2 or 3 years old, can do anything any new system can do. My 400mhz iMac DV runs Photoshop pretty damn well, sure it doesn't launch in .00003 seconds, but I can hanle the .5 second delay...... I just ordered a dual ghz G4 quicksilver, and I have no doubt that will be even faster then my Athalon XP2100+ ..........and while both of these systems are now considered "outdated" ........if my old iMac dv can handle most of today's software, I can just imagine what this supposedly outdated Quiclksilver I'm getting is going to do. :confused:
There is always a race for the latest and greatest, but I think systems have become so powerful that anything bought in the past year or so will now be viable for many years to come. Kind of like cars...... dramatic changes in the first 30-40 years........ but progress kind of leveled off after that....... or at least slowed to a point where a 20-30 year old vehicle could still operate on a highway without a problem......sort of like my mint 1980 Jeep CJ7:cool:
There is always a race for the latest and greatest, but I think systems have become so powerful that anything bought in the past year or so will now be viable for many years to come. Kind of like cars...... dramatic changes in the first 30-40 years........ but progress kind of leveled off after that....... or at least slowed to a point where a 20-30 year old vehicle could still operate on a highway without a problem......sort of like my mint 1980 Jeep CJ7:cool:
sbddude
Apr 28, 05:35 PM
the newest firmware (as of today) 4.3.2 is jailbreakable with redsn0w rc 14.
preserve your baseband if you ever want to unlock or increase resale
preserve your baseband if you ever want to unlock or increase resale
sblasl
Sep 2, 06:09 PM
If you have a couple of cases, why is this phone so scratched up in 2 weeks time? It looks like you put it in your pocket with keys and $3.00 in change?
No comments:
Post a Comment